Part of circles

 Parts of a Circle

Many objects that we come across in our daily life are ‘round’ in shape such as a coin, bangles, bottle caps, the Earth, wheels etc. In layman terms, the round shape is often referred to as a circle. A closed plane figure, which is formed by the set of all those points which are equidistant from a fixed point in the same plane, is known as a circle. In other words, a circle can be described as the locus of a point moving in a plane, in such a way that its distance from a fixed point is always constant. The fixed point is called the centre of the circle and the constant distance between any point on the circle and its centre is called the radius.



Figure 1: Centre and Radius of circle figure


Names of parts of a circle

A circle can have different parts and based on the position and shape, these can be named as follows:


Centre

Radius

Diameter

Circumference

Tangent

Secant

Chord

Arc

Segment

Sector

As we have already discussed the centre and radius of a circle. And the diameter is equal to the twice the radius. Let us see the other parts of a circle in detail.


Circumference of Circle

The circumference of a circle can be defined as the distance around it. This can be understood with the help of an example. Suppose a wire of length 10 cm is bent so that it forms a circle. Here, the circumference is equal to the length of the wire, i.e. 10 cm.


How to draw a circle?


Figure 1 given above, represents a circle with radius ‘r’ and centre ‘O’. A circle of any particular radius can be easily traced using a compass. The pointed leg of the compass is placed on the paper and the movable leg is revolved as shown. The traced figure gives us a circle.




Position of Points of a circle


In the below figure, various points are marked lying either outside or inside the circle or on the circle. Based on this any point can be defined as:




Exterior Point: Points lying in the plane of the circle such that its distance from its centre is greater than the radius of the circle are exterior points. A point X is exterior point w.r.t to circle with centre ‘O’ if OX > r. In fig. 2 A, D, G and B are exterior points.

Interior Points: Point lying in the plane of the circle such that its distance from its centre is less than the radius of the circle is known as the interior point. A point X is interior-point w.r.t to circle with centre ‘O’ if OX < r. In fig. 2 C, F, and E are interior points.

Points on the circumference of a circle: Points lying in the plane of the circle suchthat its distance from its centre is equal to the radius of a circle. In simple words, a set of points lying on the circle are points on the circumference of a circle.

A point X is said to lie on the circumference of a circle with centre ‘O’ if OX = 


In fig. 2, points P, S and R lie on the circumference of a circle and on joining these points with the centre, i.e. OR, OP and OS will represent the radius of the given circl


Now that you have learned about a point and its relative position with respect to a circle; let’s understand a line and its relative position with respect to a circle. Given a line and a circle, it could either be touching the circle or non-touching as shown below:Parts Of A Circ


Seca


In the first fig. the line AB intersects the circle at two distinct points P and Q. The line AB here is called secant of the circle. The line segment PQ is known as the chord of the circle as its endpoints lie on the circumference of the circle. A chord passing through a centre of the circle is known as the diameter of the circle and it is the largest chord of the circl


Tange


In the second figure, the line AB touches the circle exactly at one point, P. A line touching the circle at one single point is known as the tangent to the circl


In the last figure, the line does not touch the circle anywhere, therefore, it is known as a non- intersecting lin


Cho


A line segment joining two different points on the circumference of a circle is called a chord of the circle. A circle can have any number of chords. Diameter is the largest chord of a circl


Arc of a circ

A part of a circumference of the circle is known as an arc. An arc is a continuous piece of the circle.Arc of circl


The arc PAQ is known as the minor arc and arc PBQ is the major ar


Now go through the circular region which is cut off from the rest of the circle by a secant or a chor


Segme


Part of a circle bounded by a chord and an arc is known as a segment of the circle. The figure given below depicts the major and minor segments of the circl


Major and Minor Segmen


Sect


A sector of a circle is the part bounded by two radii and an arc of a circle. In the below-given fig. AOB is a sector of a circle with O as center.




Comments

Post a Comment

Popular posts from this blog

BODMAS RULE IN MATHEMATICS

Image
  What is BODMAS ? The evaluation of an expression involving numbers is one of the basic tasks in arithmetic. If an expression contains addition (+), subtraction (-), multiplication (x), division (÷), bracket (), and Of (of), then the precedence of simplification of the operation is given by “BODMAS rule”. First, we have to know that what is  BODMAS rule ? Or What is BODMAS formula? BODMAS rule  is a rule or order that is used to simplify the arithmetic expression involving more operators in mathematics. When an equation involving more operators first we have to know that in which order we have to solve the expression. This problem is solved with the help of BODMAS rule. The full form of BODMAS is: B rackets (Parts of a calculation inside the bracket always come first). Precedence of brackets are : [{(bar)}] O rders (powers and square roots) D ivision M ultiplication A ddition S ubtraction Each letter of the word stands for the first letter of an operator. If an expression involving tw
Read more
Image
Pascal's Triangle Pascal’s Triangle  is a kind of number pattern.  Pascal’s Triangle is the triangular arrangement of numbers that gives the coefficients in the expansion of any binomial expression.  The numbers are so arranged that they reflect as a triangle. Firstly, 1 is placed at the top, and then we start putting the numbers in a triangular pattern. The numbers which we get in each step are the addition of the above two numbers. It is similar to the concept of  triangular numbers .  In this article, we are going to learn Pascal’s triangle history, definition, properties, patterns, formulas and examples with complete explanation. Table of contents: History Definition Construction How to use Patterns Properties Formula Expansion FAQs Pascal’s Triangle History Blaise Pascal was born at Clermont-Ferrand, in the Auvergne region of France on June 19, 1623. In 1653 he wrote the Treatise on the Arithmetical Triangle which today is known as the  Pascal’s Triangle . Although other mathe
Read more

History of Statistics

 The early writings on statistical inference date back to Arab mathematicians and cryptographers, during the Islamic Golden Age between the 8th and 13th centuries. Al-Khalil (717–786) wrote the Book of Cryptographic Messages, which contains the first use of permutations and combinations, to list all possible Arabic words with and without vowels.[13] In his book, Manuscript on Deciphering Cryptographic Messages, Al-Kindi gave a detailed description of how to use frequency analysis to decipher encrypted messages. Al-Kindi also made the earliest known use of statistical inference, while he and later Arab cryptographers developed the early statistical methods for decoding encrypted messages. Ibn Adlan (1187–1268) later made an important contribution, on the use of sample size in frequency analysis.[13] The earliest European writing on statistics dates back to 1663, with the publication of Natural and Political Observations upon the Bills of Mortality by John Graunt.[14] Early applications
Read more